H.T.H.P. RAPID JET DYING MACHINE (LONG TUBE-HORIZONTAL)

H.T.H.P. Rapid Jet Dyeing Machine

H.T.H.P.  RAPID JET DYEING MACHINE - Consist of :

  • Autoclave : In horizontal and conical construction equipped with a port and cover for the fabric loading in the front. The group and polished reel and separator are located inside the autoclave is pressurised by compressed air. Pressure guage and necessary safety values are provided.
    Main dia of the autoclave       : 600 mm
    straight part of the autoclave  : 7000 mm
  • Flow Tubes : Flow tubes are made of stainless steel and are highly polished and connected to the autoclave. Necessary flow control valves and by pass valves for the fine adjustments of flow quantity are provided.
  • Main liquor circulation pump : For the liquor  circulation and fabric movements and efficient centrifugal pump made of stainless steel is provided. The pump is driven by directly coupled to fully enclosed two pole induction motor of 20 H.P.
  • Heat Exchanger : Heat exchanger is made from stainless steel. The heat exchanger is of shell and tube type construction and is entirely mode of stainless. The heat exchanger is suitable for raising temperature of the dye liquor from 30'C to 130'C at a steam pressure of 4.0 Kgs./cm2. The heat exchanger is suitable for cooling down the dye liquor from 1.3'C to 8O'C.
  • Reserve Tank : One reserve tank made of stainless steel is provided outside the high pressure circuits for the preparation to dyestuff and chemicals.
  • Miscellaneous :
    1. One filter for the heat exchanger.
    2. One lamp is provided on the top of the autoclave for efficiently illuminating the inside of the autoclave.
  • Control panel : The following controls are provided.
    1. Temperature indicator and automatic temperature controlling instruments.
    2. On/of swatches for the operation of pumps and other control.
    3. Indicating lamps etc.
    4. Pneumatic circuits controls.
  • Draw Reel : One draw reel with necessary drive is provided on the front top of the autoclave near the cover suitable for loading and unloading of the autoclave.
  • Nozzle: One No. Jet Nozzle will be supplied with the machine.
  • Scope of supply :
    1. One autoclave complete with all the internal pipelines. valves, foundation block and other such parts necessary for normal operation.
    2. One control panel as above.
    3. One draw reel as above.

SPECIFICATIONS : 150 Kgs ( LONG TUBE-HORIZONTAL ) MODEL.

Maximum Dying Capacity
Maximum Working Pressure
Maximum Temperature
Total Liquor Capacity
Total Working Liquor Capacity
Fabric Speed
Steam Consumption
Nozzle Pressure
Power Consumption
Overall Length Auroclave
Overall Length Of Machine
Total Working Space Required
 
 
Suitability
Material of Construction
150kgs. Capacity.
4 - 5Kgs. Capacity
130oC To 140oC
2,700 Ltrs.
900/1050 Ltrs.
100 to 500 Mtrs./min
240 Kgs.
0.5-3 Kg/CM2
23H.P./17.5 KW.
9,300mmAppx.
11,000mm Appx.
Length : 13Mtrs. Appx.
Width : 4 Mtrs. Appx.
Height : 3 Mtrs. Appx.
Most suitable for woven, knitted and Texturised 100% Synthetics & Blended Fabric.
All parts that comes in contact with Dye Liquors are made of s.s 316.

| U Type Jet Dyeing Machine | Home |